How to Find Your Ring Size
Step 1 — Measure Your Finger
Cut a thin strip of paper (or use a piece of string) approximately 10 cm long. Wrap it snugly — but not tightly — around the base of the finger you plan to wear the ring on. Mark the point where the paper overlaps, then lay it flat against a ruler. This measurement in millimetres is your finger circumference. Use the table below to find your size:
| US Size | Circumference (mm) | Diameter (mm) |
|---|---|---|
| 5 | 49.3 | 15.7 |
| 6 | 51.8 | 16.5 |
| 7 | 54.4 | 17.3 |
| 8 | 57.0 | 18.1 |
| 9 | 59.5 | 18.9 |
| 10 | 62.1 | 19.8 |
| 11 | 64.6 | 20.6 |
| 12 | 67.2 | 21.4 |
Tips for an Accurate Fit
Wider Bands
Bands 6 mm or wider sit higher on the finger and feel snugger than a narrow ring of the same size. If you are ordering a wide-band style, we recommend sizing up by half a size to ensure comfortable everyday wear.
Knuckle Fit
If your knuckle is noticeably wider than the base of your finger, measure both and choose a size in between. The ring should slide over your knuckle with gentle resistance and sit comfortably at the base without spinning excessively.
Temperature & Time of Day
Fingers naturally swell in warm weather and shrink in the cold. For the most reliable measurement, size your finger at the end of the day when it is at its largest, and at room temperature. Avoid measuring first thing in the morning or after exercise.
A Note on Handcrafted Rings
Our rings are handcrafted, which means slight variations in size and finish are part of their character. Actual dimensions may vary by up to ±0.5 mm from the stated size. We strongly recommend confirming your measurement — ideally by visiting a local jeweller for a professional sizing — before placing your order. We cannot guarantee a universal fit, and sizing guidance is provided as a general reference only.
Still Not Sure?
Drop us a message before you order and we'll do our best to help you find the right fit.